UL 752

Standard for Bullet-Resisting Equipment

This standard is a US standard, from the Underwriters Laboratories.  The standard covers materials, devices, and fixtures used to form bullet-resisting barriers which protect against robbery, holdup or armed attack such as those by snipers.  This standard can also be used to determine the bullet resistance of building components that do not fit the definition of equipment, such as windows, walls, or barriers made out of bullet resistant materials.

To view the products that can incorporate UL752 bullet resistant glass see the below links .

Bespoke items 

Bullet Resistant Windows                                           Ballistic windows to resist bullets from 9mm Luger to 7.62 AP                                                    

Security Counters and Screens                                Physical, Ballistic or Blast resisting counters for any application to keep staff secure

Ballistic and Blast Resistant Guard Houses        Modular New Build or Upgrading existing. EN1522/3 FB2 to FB7 , NIJ 0108.01 LII to IV UL 752

Bullet Resistant Doors                                                   A range of fully tested and certified ballistic single and double doors. 

For more information on the UL752 standard and to download the PDF, please click the link     

Architectural Armour offer a range of bullet resistant products to different standards, please click the relevant link below to find out more ; 

For our full range of technical specifications please click on relevant headings below;

Other Ballistic Technical Specifications

EN 1063               Glass in Building - Security Glazing - Testing and Classification of Resistance Against Bullet Attack

BS 5051                Bullet-resistant glazing - Part 1:  for interior use- Part 2: for Exterior use

NIJ 0108.01      US National Institute of Justice Standard-Test and Certification for Ballistic Resistant Materials

EN 1522/3          Windows, doors, shutters and blinds - Bullet resistance - Requirements and classification /Test method

Blast Specifications

GSA-TS01:2003     Standard Test Method for Glazing and Window Systems Subject to Dynamic Overpressure Loadings

EN 13541                   Glass in building - Security glazing - Testing and classification of resistance against explosion pressure 

EN 13123-2               Windows, doors and shutters - Explosion resistance - Requirements and classification

ISO 16933:2007  Glass in Building -- Explosion-Resistant Security Glazing -- Test & Classification for Arena Air-Blast Loading

Fire Specifications

UL 10C            Positive Fire Pressure Tests of Door Assemblies 

EN 1363-1    Fire resistance tests –Part 1: General Requirements

EN 1364-1     Fire resistance tests for non-load-bearing elements – Part 1: Walls

BS 476 Part 22     Fire tests on building materials and structures

EN 1634-1   Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware 

Attack Specifications

EN 1627   Pedestrian door-sets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification

LPS 1270   Intruder Resistant Security Glazing -  Requirements & Testing Procedures 

LPS 1175 Requirements and testing procedures for the LPCB certification and listing of intruder resistant building components, strongpoints, security enclosures and free-standing barriers

EN 356         Glass in building - Security glazing - Testing and classification of resistance against manual attack.

LPS 1175 and 1270 Tool Categories   Testing procedures for the LPCB approval

This is an extract not a full report and Architectural Armour Ltd accepts no liability for any loss, direct, indirect or consequential damage incurred by using this information, to the fullest extent permitted by law. You should make your own judgement as regards use of this document and seek out the full test standards.